Hi. Now I take a test,The test Router is Cisco2611XM,I was upgraded the IOS.But why I can't assign an ip address to virtual-TokenRing 0
test(config)#inter virtual-TokenRing 0 test(config-if)#ip add test(config-if)#ip address 17 17:46:26: %LINK-3-UPDOWN: Interface Virtual-TokenRing0, changed state to up 17:46:27: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-TokenRing0, ch anged state to up test(config-if)#ip address 192.168.1.1 255.255.255.0 % IP addresses may not be configured on a Virtual-TokenRing interface. test(config-if)# ---------------------------------------------------- BTW,The show version as below. test#sh ver Cisco Internetwork Operating System Software IOS (tm) C2600 Software (C2600-DO3S-M), Version 12.1(14), RELEASE SOFTWARE (fc1) Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Mon 25-Mar-02 23:18 by kellythw Image text-base: 0x80008088, data-base: 0x80E4DE34 ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1) test uptime is 17 hours, 49 minutes System returned to ROM by power-on System image file is "flash:c2600-do3s-mz.121-14.bin" cisco 2611XM (MPC860) processor (revision 0x100) with 29696K/3072K bytes of memo ry. Processor board ID xxxxxxxxxxxxxxx M860 processor: part number 5, mask 2 Bridging software. X.25 software, Version 3.0.0. 2 FastEthernet/IEEE 802.3 interface(s) 1 Serial network interface(s) 32K bytes of non-volatile configuration memory. 16384K bytes of processor board System flash (Read/Write) Configuration register is 0x2102 thx. softmap Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62007&t=62007 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
