HSRP PROBLEM x.x.x.36 and x.x.x.37 are two routers.
f0 interface config: x.x.x.x.36 config: standby 1 ip x.x.x.35 standby 1 priority 150 standby 1 preempt delay minimum 2 standby 1 track serial0 15 f0 interface config: x.x.x.x.37 config: standby 1 ip x.x.x.35 standby 1 priority 140 standby 1 prempt standby 1 track serial0 20 Problem: Both routers keep switching roles. The serial interfaces and links are perfect. They never go down. I have disabled f0 on .37 router and when i enable it, it seems to be stuck in speak state and even takes over as active but the .36 router never registers any changes in its state during this time. Access-lists,etc arent a problem.. Thank You Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62064&t=62064 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]