what are the routers connected too that allows the routers to talk hsrp to each other...?
Larry Letterman Network Engineer Cisco Systems ----- Original Message ----- From: "Raj" To: Sent: Tuesday, January 28, 2003 2:03 PM Subject: URGENT HSRP PROBLEM [7:62064] > HSRP PROBLEM > > x.x.x.36 and x.x.x.37 are two routers. > > > f0 interface config: > x.x.x.x.36 config: > standby 1 ip x.x.x.35 > standby 1 priority 150 > standby 1 preempt delay minimum 2 > standby 1 track serial0 15 > > > f0 interface config: > x.x.x.x.37 config: > standby 1 ip x.x.x.35 > standby 1 priority 140 > standby 1 prempt > standby 1 track serial0 20 > > > Problem: > > Both routers keep switching roles. The serial interfaces and links are > perfect. They never go down. > I have disabled f0 on .37 router and when i enable it, it seems to be stuck > in speak state and even takes over as active but the .36 router never > registers any changes in its state during this time. > Access-lists,etc arent a problem.. > > Thank You [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62067&t=62064 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]