You are correct. Very nice feature eh? -----Original Message----- From: Sam Sneed [mailto:[EMAIL PROTECTED]] Sent: Wednesday, January 29, 2003 12:14 PM To: [EMAIL PROTECTED] Subject: Re: debug commands [7:62107]
I see, so if I want to debug for certain tcp protocols can I use extended access-lists? ""Maccubbin, Duncan"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Just make a permit ACL for that host and the debug will only report on that > one host. > > -----Original Message----- > From: Sam Sneed [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, January 29, 2003 11:49 AM > To: [EMAIL PROTECTED] > Subject: debug commands [7:62107] > > If I want to see all IP traffic from host 10.10.10.1 on a cisco router, what > would the debug command look like? I looked at the help menu and I think its > debug ip packet but then the options are: > Access list > Access list (expanded range) > > > Do I have to create an access-list for the hosts I want to monitor? I'm used > to using tcpdump and snoop so the debug commands are awkward for me. Its a > production router so I know I can crash it if I'm not careful with this. > > Thanks. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62114&t=62107 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]