Random thoughts: Flash card is not inserted. I'd imagine in that case it would boot to rommon. Power supply is defective/ plug into router is bent. Then I'd expect no lights. Assuming the lights work - can you see the router boot? Console port is damaged. If you have another router try connecting it to an Ethernet port and see if you can vty from the good router to the 1605.
> -----Original Message----- > From: Shawn Xu [mailto:[EMAIL PROTECTED]] > Sent: Thursday, January 30, 2003 8:16 AM > To: [EMAIL PROTECTED] > Subject: Console problem [7:62179] > > > I have a strange problem or serious problem. > > I configured a Cisco 1605R router which was configured > before. This time, I > only changed E0 and E1 ip address, and default route through > the console. > After that, I put it into the server room, booted it up, but > I couldn't ping > the interfaces. I thought maybe the interfaces were not up, I > should run "no > shutdown" command. > > I took it back to the office, connected the console port to > the com1, but it > never comes back. It is dead. It can not boot. Nothing shows in Hyper > Terminal. Maybe one time of ten times of reboot just shows @ > . That is all. > > Note: console cable, com1, and Hyper terminal are working fine. > > Any ideas? > > Thanks > > Shawn > > > _________________________________________________________________ > STOP MORE SPAM with the new MSN 8 and get 2 months FREE* > http://join.msn.com/?page=features/junkmail Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62185&t=62179 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
