make sure the router has no issues dialing the other end, add a dialer map
to the 4000 with a the broadcast keyword, i think it should do it.


""Nelson Herron""  a icrit dans le message de news:
[EMAIL PROTECTED]
> Of course I had to copy the wrong log file up yesterday (02/04/03 -
recorded
> as 02-05-03 4:01).  That one had a serious flaw that was corrected. This
is
> the one that should have been posted.  My apologies to everyone.
>
>
> Following is the client/dial-up router  ******************************
>
> r4500b#sh run
> Building configuration...
>
> Current configuration:
> !
> version 12.0
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname r4500b
> !
> no logging buffered
> enable secret 5 $1$dmkQ$LhX8ezIO8y81ypOR34wvt.
> !
> username r4000m password 0 wienerdog
> ip subnet-zero
> isdn switch-type basic-ni
> !
> !
> !
> interface Loopback0
>  ip address 172.255.255.240 255.255.255.255
>  no ip directed-broadcast
> !
> interface Loopback1
>  ip address 172.18.200.9 255.255.255.248
>  no ip directed-broadcast
> !
> interface Loopback2
>  ip address 172.18.200.17 255.255.255.240
>  no ip directed-broadcast
> !
> interface Loopback3
>  ip address 172.18.200.33 255.255.255.224
>  no ip directed-broadcast
> !
> interface Ethernet0
>  no ip address
>  no ip directed-broadcast
>  media-type 10BaseT
> !
> interface Ethernet1
>  ip address 172.18.15.254 255.255.255.0
>  no ip directed-broadcast
>  media-type 10BaseT
> !
> interface Serial0
>  ip address 172.18.196.2 255.255.255.252
>  no ip directed-broadcast
>  shutdown
> !
> interface Serial1
>  bandwidth 250
>  ip address 172.18.200.2 255.255.255.252
>  no ip directed-broadcast
> !
> interface BRI0
>  ip address 192.254.254.1 255.255.255.252
>  no ip directed-broadcast
>  encapsulation ppp
>  dialer idle-timeout 30
>  dialer watch-disable 15
>  dialer map ip 172.255.255.245 name r4000m broadcast 8358662
>  dialer map ip 192.254.254.2 name r4000m broadcast 8358662
>  dialer load-threshold 5 outbound
>  dialer watch-group 10
>  dialer-group 1
>  isdn switch-type basic-ni
>  isdn spid1 0835866101
>  isdn spid2 0835866301
>  ppp authentication chap
>  ppp multilink
> !
> interface BRI1
>  no ip address
>  no ip directed-broadcast
>  shutdown
>  isdn switch-type basic-ni
> !
> interface BRI2
>  no ip address
>  no ip directed-broadcast
>  shutdown
>  isdn switch-type basic-ni
> !
> interface BRI3
>  no ip address
>  no ip directed-broadcast
>  shutdown
>  isdn switch-type basic-ni
> !
> router eigrp 666
>  network 172.18.0.0
>  network 172.255.0.0
>  network 192.254.254.0
>  no auto-summary
> !
> ip classless
> !
> access-list 101 deny   eigrp any any
> access-list 101 permit ip any any
> dialer watch-list 10 ip 172.255.255.245 255.255.255.255
> dialer-list 1 protocol ip list 101
> !
> line con 0
>  session-timeout 2880
>  exec-timeout 2880 0
>  logging synchronous
>  transport input none
> line aux 0
> line vty 0 4
>  session-timeout 2880
>  exec-timeout 2880 0
>  password wiener
>  login
> !
> end
>
> r4500b#
>
> Following is the dial-in router **************************************
>
> r4000m#sh run
> Building configuration...
>
> Current configuration : 2238 bytes
> !
> version 12.1
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname r4000m
> !
> no logging buffered
> enable secret 5 $1$51sJ$.h3NUdXcZI/hNuQefakc60
> !
> username r4500b password 0 wienerdog
> !
> !
> !
> !
> ip subnet-zero
> no ip finger
> !
> !
> !
> !
> source-bridge ring-group 100
> source-bridge remote-peer 100 tcp 172.19.21.1
> source-bridge remote-peer 100 tcp 172.19.21.5
> source-bridge remote-peer 100 tcp 172.19.21.9
> !
> !
> interface Loopback0
>  ip address 172.255.255.245 255.255.255.255
> !
> interface Loopback1
>  ip address 172.19.21.1 255.255.255.252
> !
> interface Loopback2
>  ip address 172.18.196.9 255.255.255.248
> !
> interface Loopback3
>  ip address 172.18.196.17 255.255.255.240
> !
> interface Loopback4
>  ip address 172.18.196.33 255.255.255.224
> !
> interface Loopback5
>  ip address 172.18.196.65 255.255.255.192
> !
> interface Loopback6
>  ip address 172.18.196.129 255.255.255.128
> !
> interface Serial0
>  bandwidth 250
>  ip address 172.18.200.1 255.255.255.252
> !
> interface Serial1
>  bandwidth 250
>  ip address 172.18.196.2 255.255.255.252
> !
> interface TokenRing0
>  no ip address
>  shutdown
>  ring-speed 16
>  multiring all
>  source-bridge 10 1 100
>  source-bridge spanning
> !
> interface BRI0
>  ip address 192.254.254.2 255.255.255.252
>  encapsulation ppp
>  dialer idle-timeout 9999
>  dialer-group 1
>  isdn switch-type basic-ni
>  isdn spid1 0835866201
>  isdn spid2 0835866401
>  ppp authentication chap
> !
> interface BRI1
>  no ip address
>  shutdown
>  isdn switch-type basic-ni
> !
> interface BRI2
>  no ip address
>  shutdown
>  isdn switch-type basic-ni
> !
> interface BRI3
>  no ip address
>  isdn switch-type basic-ni
> !
> router eigrp 666
>  network 172.18.196.0 0.0.0.3
>  network 172.18.196.8 0.0.0.7
>  network 172.18.196.16 0.0.0.15
>  network 172.18.196.32 0.0.0.31
>  network 172.18.196.64 0.0.0.63
>  network 172.18.196.128 0.0.0.127
>  network 172.18.200.0 0.0.0.3
>  network 172.19.21.0 0.0.0.3
>  network 172.255.255.245 0.0.0.0
>  network 192.254.254.0 0.0.0.3
>  no auto-summary
>  no eigrp log-neighbor-changes
> !
> ip classless
> no ip http server
> !
> dialer-list 1 protocol ip permit
> !
> !
> line con 0
>  session-timeout 2880
>  exec-timeout 2880 0
>  logging synchronous
>  transport input none
> line aux 0
> line vty 0 4
>  session-timeout 2880
>  exec-timeout 2880 0
>  password wiener
>  login
> !
> end
>
> r4000m#sh ip route
> Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
>        D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
>        N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
>        E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
>        i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate
> default
>        U - per-user static route, o - ODR
>
> Gateway of last resort is not set
>
>      172.255.0.0/32 is subnetted, 2 subnets
> D       172.255.255.245 [90/10880000] via 172.18.200.1, 00:00:05, Serial1
> C       172.255.255.240 is directly connected, Loopback0
>      172.19.0.0/30 is subnetted, 1 subnets
> D       172.19.21.0 [90/10880000] via 172.18.200.1, 00:00:05, Serial1
>      172.18.0.0/16 is variably subnetted, 9 subnets, 6 masks
> D       172.18.196.64/26 [90/10880000] via 172.18.200.1, 00:00:05, Serial1
> C       172.18.200.32/27 is directly connected, Loopback3
> D       172.18.196.32/27 [90/10880000] via 172.18.200.1, 00:00:05, Serial1
> C       172.18.200.16/28 is directly connected, Loopback2
> D       172.18.196.16/28 [90/10880000] via 172.18.200.1, 00:00:05, Serial1
> D       172.18.196.8/29 [90/10880000] via 172.18.200.1, 00:00:05, Serial1
> C       172.18.200.0/30 is directly connected, Serial1
> C       172.18.200.8/29 is directly connected, Loopback1
> D       172.18.196.128/25 [90/10880000] via 172.18.200.1, 00:00:07,
Serial1
>      192.254.254.0/30 is subnetted, 1 subnets
> C       192.254.254.0 is directly connected, BRI0
> r4500b#
> 6d04h: %LINK-3-UPDOWN: Interface Serial1, changed state to down
> r4500b#
> 6d04h: DDR: Dialer Watch: watch-group = 10
> 6d04h: DDR:   network 172.255.255.245/255.255.255.255 DOWN,
> 6d04h: DDR:   primary DOWN
> 6d04h: DDR: Dialer Watch: Dial Reason: Primary of group 10 DOWN
> 6d04h: DDR: Dialer Watch: watch-group = 10,
> 6d04h: DDR: Dialer Watch: watch-group = 10
> 6d04h: DDR:   network 172.255.255.245/255.255.255.255 DOWN,
> 6d04h: DDR:   primary DOWN
> 6d04h: DDR: Dialer Watch: Dial Reason: Primary of group 10 DOWN
> 6d04h: DDR: Dialer Watch: watch-group = 10,
> r4500b#
> 6d04h: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed
> state to down
> r4500b#sh ip route
> Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
>        D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
>        N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
>        E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
>        i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate
> default
>        U - per-user static route, o - ODR
>
> Gateway of last resort is not set
>
>      172.255.0.0/32 is subnetted, 1 subnets
> C       172.255.255.240 is directly connected, Loopback0
>      172.18.0.0/16 is variably subnetted, 3 subnets, 3 masks
> C       172.18.200.32/27 is directly connected, Loopback3
> C       172.18.200.16/28 is directly connected, Loopback2
> C       172.18.200.8/29 is directly connected, Loopback1
>      192.254.254.0/30 is subnetted, 1 subnets
> C       192.254.254.0 is directly connected, BRI0
> r4500b#ping 172.255.255.245
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 172.255.255.245, timeout is 2 seconds:
> .....
> Success rate is 0 percent (0/5)
> r4500b#
> r4500b#
> r4500b#sh is ac
> ----------------------------------------------------------------------
>                                 ISDN ACTIVE CALLS
> ----------------------------------------------------------------------
> History table has a maximum of 100 entries.
> History table data is retained for a maximum of 15 Minutes.
> ----------------------------------------------------------------------
> Call    Calling      Called       Remote  Seconds Seconds Seconds Charges
> Type    Number       Number       Name    Used    Left    Idle
> Units/Currency
> ----------------------------------------------------------------------
>
> r4500b#ping 192.254.254.2
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 192.254.254.2, timeout is 2 seconds:
> .!!!!
> Success rate is 80 percent (4/5), round-trip min/avg/max = 32/43/68 ms
> r4500b#
> 6d04h: BR0 DDR: Dialing cause ip (s=192.254.254.1, d=192.254.254.2)
> 6d04h: BR0 DDR: Attempting to dial 8358662
> 6d04h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
> 6d04h: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 8358662
> 6d04h: BR0:1 PPP: Treating connection as a callout
> 6d04h: BR0:1 PPP: Phase is ESTABLISHING, Active Open
> 6d04h: BR0:1 LCP: O CONFREQ [Closed] id 26 len 28
> 6d04h: BR0:1 LCP:    AuthProto CHAP (0x0305C22305)
> 6d04h: BR0:1 LCP:    MagicNumber 0x802C82FD (0x0506802C82FD)
> 6d04h: BR0:1 LCP:    MRRU 1524 (0x110405F4)
> 6d04h: BR0:1 LCP:    EndpointDisc 1 Local (0x130901723435303062)
> 6d04h: BR0:1 LCP: I CONFREQ [REQsent] id 18 len 15
> 6d04h: BR0:1 LCP:    AuthProto CHAP (0x0305C22305)
> 6d04h: BR0:1 LCP:    MagicNumber 0x0BFF8AC6 (0x05060BFF8AC6)
> 6d04h: BR0:1 LCP: O CONFACK [REQsent] id 18 len 15
> 6d04h: BR0:1 LCP:    AuthProto CHAP (0x0305C22305)
> 6d04h: BR0:1 LCP:    MagicNumber 0x0BFF8AC6 (0x05060BFF8AC6)
> 6d04h: BR0:1 LCP: I CONFREJ [ACKsent] id 26 len 8
> 6d04h: BR0:1 LCP:    MRRU 1524 (0x110405F4)
> 6d04h: BR0:1 LCP: O CONFREQ [ACKsent] id 27 len 24
> 6d04h: BR0:1 LCP:    AuthProto CHAP (0x0305C22305)
> 6d04h: BR0:1 LCP:    MagicNumber 0x802C82FD (0x0506802C82FD)
> 6d04h: BR0:1 LCP:    EndpointDisc 1 Local (0x130901723435303062)
> 6d04h: BR0:1 LCP: I CONFACK [ACKsent] id 27 len 24
> 6d04h: BR0:1 LCP:    AuthProto CHAP (0x0305C22305)
> 6d04h: BR0:1 LCP:    MagicNumber 0x802C82FD (0x0506802C82FD)
> 6d04h: BR0:1 LCP:    EndpointDisc 1 Local (0x130901723435303062)
> 6d04h: BR0:1 LCP: State is Open
> 6d04h: BR0:1 PPP: Phase is AUTHENTICATING, by both
> 6d04h: BR0:1 CHAP: O CHALLENGE id 243 len 27 from "r4500b"
> 6d04h: BR0:1 CHAP: I CHALLENGE id 14 len 27 from "r4000m"
> 6d04h: BR0:1 CHAP: O RESPONSE id 14 len 27 from "r4500b"
> 6d04h: BR0:1 CHAP: I SUCCESS id 14 len 4
> 6d04h: BR0:1 CHAP: I RESPONSE id 243 len 27 from "r4000m"
> 6d04h: BR0:1 CHAP: O SUCCESS id 243 len 4
> 6d04h: BR0:1 PPP: Phase is UP
> 6d04h: BR0:1 IPCP: O CONFREQ [Closed] id 18 len 10
> 6d04h: BR0:1 IPCP:    Address 192.254.254.1 (0x0306C0FEFE01)
> 6d04h: BR0:1 CDPCP: O CONFREQ [Closed] id 18 len 4
> 6d04h: BR0:1 IPCP: I CONFREQ [REQsent] id 20 len 10
> 6d04h: BR0:1 IPCP:    Address 192.254.254.2 (0x0306C0FEFE02)
> 6d04h: BR0:1 IPCP: O CONFNAK [REQsent] id 20 len 10
> 6d04h: BR0:1 IPCP:    Address 172.255.255.245 (0x0306ACFFFFF5)
> 6d04h: BR0:1 CDPCP: I CONFREQ [REQsent] id 18 len 4
> 6d04h: BR0:1 CDPCP: O CONFACK [REQsent] id 18 len 4
> 6d04h: BR0:1 IPCP: I CONFACK [REQsent] id 18 len 10
> 6d04h: BR0:1 IPCP:    Address 192.254.254.1 (0x0306C0FEFE01)
> 6d04h: BR0:1 CDPCP: I CONFACK [ACKsent] id 18 len 4
> 6d04h: BR0:1 CDPCP: State is Open
> 6d04h: BR0:1 IPCP: I CONFREQ [ACKrcvd] id 21 len 4
> 6d04h: BR0:1 IPCP: O CONFACK [ACKrcvd] id 21 len 4
> 6d04h: BR0:1 IPCP: State is Open
> 6d04h: BR0:1 DDR: dialer protocol up
> 6d04h: BR0 IPCP: Install route to 172.255.255.245
> 6d04h: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1, changed
state
> to up
> 6d04h: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 8358662
r4000m
> r4500b#ping 192.254.254.2
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 192.254.254.2, timeout is 2 seconds:
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 32/35/36 ms
> r4500b#sh is ac
> ----------------------------------------------------------------------
>                                 ISDN ACTIVE CALLS
> ----------------------------------------------------------------------
> History table has a maximum of 100 entries.
> History table data is retained for a maximum of 15 Minutes.
> ----------------------------------------------------------------------
> Call    Calling      Called       Remote  Seconds Seconds Seconds Charges
> Type    Number       Number       Name    Used    Left    Idle
> Units/Currency
> ----------------------------------------------------------------------
> Out                 8358662       r4000m       18      24       5
> 0
> ----------------------------------------------------------------------
>
> r4500b#sh is ac
> ----------------------------------------------------------------------
>                                 ISDN ACTIVE CALLS
> ----------------------------------------------------------------------
> History table has a maximum of 100 entries.
> History table data is retained for a maximum of 15 Minutes.
> ----------------------------------------------------------------------
> Call    Calling      Called       Remote  Seconds Seconds Seconds Charges
> Type    Number       Number       Name    Used    Left    Idle
> Units/Currency
> ----------------------------------------------------------------------
> Out                 8358662       r4000m       30      11      18
> 0
> ----------------------------------------------------------------------
>
> r4500b#
> 6d04h: BR0:1 DDR: idle timeout
> 6d04h: BR0:1 DDR: disconnecting call
> 6d04h: %ISDN-6-DISCONNECT: Interface BRI0:1  disconnected from 8358662
> r4000m, call lasted 42 seconds
> 6d04h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
> 6d04h: BR0:1 IPCP: State is Closed
> 6d04h: BR0:1 CDPCP: State is Closed
> 6d04h: BR0:1 PPP: Phase is TERMINATING
> 6d04h: BR0:1 LCP: State is Closed
> 6d04h: BR0:1 PPP: Phase is DOWN
> 6d04h: BR0:1 DDR: disconnecting call
> 6d04h: DDR: Dialer Watch: watch-group = 10
> 6d04h: DDR:   network 172.255.255.245/255.255.255.255 DOWN,
> 6d04h: DDR:   primary DOWN
> 6d04h: DDR: Dialer Watch: Dial Reason: Primary of group 10 DOWN
> 6d04h: DDR: Dialer Watch: watch-group = 10,
> 6d04h: BR0 IPCP: Remove route to 172.255.255.245
> 6d04h: DDR: Dialer Watch: watch-group = 10
> 6d04h: DDR:   network 172.255.255.245/255.255.255.255 DOWN,
> 6d04h: DDR:   primary DOWN
> 6d04h: DDR: Dialer Watch: Dial Reason: Primary of group 10 DOWN
> 6d04h: DDR: Dialer Watch: watch-group = 10,
> r4500b#
> 6d04h: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1, changed
state
> to down
> r4500b#sh is ac
> ----------------------------------------------------------------------
>                                 ISDN ACTIVE CALLS
> ----------------------------------------------------------------------
> History table has a maximum of 100 entries.
> History table data is retained for a maximum of 15 Minutes.
> ----------------------------------------------------------------------Call
Calling      Called       Remote  Seconds Seconds Seconds Charges
> Type    Number       Number       Name    Used    Left    Idle
> Units/Currency
> ----------------------------------------------------------------------
>
>
> r4500b#
> r4500b#
> 6d04h: DDR: Dialer Watch: watch-group = 10
> 6d04h: DDR:       network 172.255.255.245/255.255.255.255 DOWN,
> 6d04h: DDR:       primary DOWN
> 6d04h: DDR: Dialer Watch: Dial Reason: Primary of group 10 DOWN
> 6d04h: DDR: Dialer Watch: watch-group = 10,
> 6d04h: DDR: Dialer Watch: watch-group = 10
> 6d04h: DDR:       network 172.255.255.245/255.255.255.255 DOWN,
> 6d04h: DDR:       primary DOWN
> 6d04h: DDR: Dialer Watch: Dial Reason: Primary of group 10 DOWN
> 6d04h: DDR: Dialer Watch: watch-group = 10,
> r4500b#




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=62647&t=62423
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to