[EMAIL PROTECTED] wrote: > > Hi, > > 1) i do a "show memory" on a cisco 26xx router. It shows me the > Total > Processor Memory and Total IO memory. > When i add up these 2 values, why is it not equal to total > amount of DRAM in > your router (as shown by sh ver)???
Total is the total amount of memory in bytes available for the processor after the Cisco IOS software is loaded. It will be less than the DRAM assuming you have a router that loads IOS into memory. I can't answer your MIBs question. Anyone else? Priscilla > > 2)Assuming the "sh memory" output does not give us the correct > picture about > memory utilization, which MIBs and objects should we monitor to > get the > memory utilization( as a %)of the router? > Or can we atleast get the "free memory" , "used memory" or > "total memory" > via SNMP and using MIB expressions, we can compute the Memory > utilization as > a %??What are the MIBs and objects to get this info? > > Cheers > Simon > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62818&t=62800 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]