Please help, I went with PIX instead of CP and I cannot
find a way to do this now!!!
Setup
PIX 515E-ur
-----------------------------------------
| PIX inside PIX intf2 |
| 192.168.25.0/24 10.178.25.25/16 |
----------------------------------------
| |
| --------> |
| Inside get nat when |
| going to intf2 |
Network Network
I want the following NAT setup to happen:
If src inside=any, dst intf2=10.178.10.10 then xlate src=10.178.70.20
If src inside=any, dst intf2=10.178.10.11 then xlate src=10.178.80.30
If src inside=any, dst intf2=10.178.10.12 then xlate src=10.178.90.40
otherwise
if src inside=any, dst intf2=any then no Xlate
I do not want to use statics because there are alot of different boxes
and there is no router in this setup that can perform the nat
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=63281&t=63281
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
