Tried Nat 0 (inside) access-list_nat0 Nat 1 rest ip traffic to outside (nat id 1 same as global (int) id 1)
Access-list_nat0 do not nat to ip range 2nd interface Martijn -----Oorspronkelijk bericht----- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Namens Robert Perez Verzonden: dinsdag 18 februari 2003 19:15 Aan: [EMAIL PROTECTED] Onderwerp: Can this nat be done on a pix?? [7:63281] Please help, I went with PIX instead of CP and I cannot find a way to do this now!!! Setup PIX 515E-ur ----------------------------------------- | PIX inside PIX intf2 | | 192.168.25.0/24 10.178.25.25/16 | ---------------------------------------- | | | --------> | | Inside get nat when | | going to intf2 | Network Network I want the following NAT setup to happen: If src inside=any, dst intf2=10.178.10.10 then xlate src=10.178.70.20 If src inside=any, dst intf2=10.178.10.11 then xlate src=10.178.80.30 If src inside=any, dst intf2=10.178.10.12 then xlate src=10.178.90.40 otherwise if src inside=any, dst intf2=any then no Xlate I do not want to use statics because there are alot of different boxes and there is no router in this setup that can perform the nat Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63284&t=63281 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]