At the line level in your config make sure you have 'no exec' configured
on the lines leading to your 'remote' devices or this sort of thing will
happen all the time.
HTH,
John
>>> "McHugh Randy" 2/24/03 3:55:19 PM >>>
It appears that I cannot establish a telnet session to my routers from
the
term server. How can I clear the line
TS#sh ses
% No connections open
TS#r1
Translating "r1"
Trying r1 (1.1.1.1, 2097)...
% Connection refused by remote host
TS#r2
Translating "r2"
Trying r2 (1.1.1.1, 2098)...
% Connection refused by remote host
TS#clear line ?
Line number
aux Auxiliary line
console Primary terminal line
tty Terminal controller
vty Virtual terminal
TS#clear line
thanks
Randy
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=63667&t=63660
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
