HI Tigers, First things, are the interfaces in a administratively shut or are the down|down ? If admin shut, then all you need to do is do a no shut under each of the interfaces you want to enable.
If you do that and they are now down|down or where orginally down|down, you are not even getting a signal from the FR switch. Start with the basics and debug your LMI and see if you are getting info back! Cheers Troy tigers zheng wrote: > > Hi,everyone: > I have a question about frame-relay!Please tell me why it > happened? > the topolofy :r1(s0)---(s0/0)r2(s0/1)---(s0/0)r3 > r1:2511,r2:2620,r3:2621 > > the configuration: > r1: > interface s0 > ip address 10.10.10.1 255.255.255.0 > encapsulation frame-relay > frame-relay lmi-type ansi > frame-relay intf-type dte > frame-relay interface-dlci 100 > ! > r3: > interface s0/0 > ip address 10.10.10.2 255.255.255.0 > encapsulation frame-relay > frame-relay lmi-type ansi > frame-relay intf-type dte > frame-relay interface-dlci 101 > ! > r2: > frame-relay switching > int s0/0 > no ip address > encapsulation frame-relay > clockrate 64000 > frame-relay route 100 interface s0/1 101 > frame-relay lmi-type ansi > frame-relay intf-type dce > ! > int s0/1 > no ip address > encapsulation frame-relay > clockrate 128000 > frame-relay route 101 interface s0/0 100 > frame-relay lmi-type ansi > frame-relay intf-type dce > ! > But the serial of all of the router is shutdown,line protocol > is also down! > I want to know what happen! > Thanks very much! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=64058&t=63973 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
