I updated a PIX 506 with 6.2.2 and the lastest PDM. I did the setup through the PDM, setup PAT for the outside to inside interface, and told it to use DHCP to acquire on the outside interface.
Comcast assigns IP addresses in the Philadelphia area according to the MAC address, so if you change the network card or device attached to the cable modem you'll get a different IP. I turned the modem off, attached the Pix, turned on the modem, and then fired up the PiX. The standard settings in the PDM should work, but it isn't. Has anyone had any luck getting the Pix to get dhcp from Comcast? Howard Bloom 610-745-0115 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=64209&t=64209 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
