Works fine for me... ip address outside dhcp setroute global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 0 0
Mike --- H Howard Lewis Bloom wrote: > I updated a PIX 506 with 6.2.2 and the lastest PDM. > I did the setup > through the PDM, setup PAT for the outside to inside > interface, and > told it to use DHCP to acquire on the outside > interface. > > Comcast assigns IP addresses in the Philadelphia > area according to the > MAC address, so if you change the network card or > device attached to > the cable modem you'll get a different IP. > > I turned the modem off, attached the Pix, turned on > the modem, and > then fired up the PiX. > > The standard settings in the PDM should work, but > it isn't. > > Has anyone had any luck getting the Pix to get dhcp > from Comcast? > > Howard Bloom > 610-745-0115 [EMAIL PROTECTED] __________________________________________________ Do you Yahoo!? Yahoo! Tax Center - forms, calculators, tips, more http://taxes.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=64211&t=64211 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
