I just bought a 2501 router through Ebay for my CCIP/CCNP study and it's not
supposed to have an IOS on it. When I power it up, instead of getting the
rommon> prompt, I get the Main Diagnostic Menu as shown below. If I execute
the diag tests offered all the tests pass, but I just can't get past this
menu.
Can someone, please, tell me what is wrong with it or how I can work around
it?
Thanks a lot
JM
(I had some problems with my mailer, so sorry if it gets posted twice)
------- (output at power up)----------
cisco Systems
Diagnostic Monitor
Testing boot state
Exiting boot state
Testing Main Memory from 0h to E000h. data equals address
Testing Main Memory from 0h to E000h. checkerboard
Testing Main Memory from 0h to E000h. inverse checkerboard
Clearing bss
Enabling interrupts
Exiting init
Diagnostic Monitor for CANCUN, Version 1.7.4(4)
Compiled by haidung on Wed 19-Nov-97 14:26
Main Diagnostic Menu
a: alter diag flags
b: basic utilities
c: do all diags in this menu
d: do group of diags in this menu
e: bus error test
f: image checksum test
g: timer interrupt test
h: size memory
i: main memory test
j: main memory parity test
k: shared memory test
l: shared memory parity test
m: flash memory test
n: nvram test
o: aux port test
p: serial cookie test
q: serial interface test
s: ethernet (Am79C90-LANCE) test
FLAGS: Continuous OFF Stop on error OFF Ext. loopback ON Abbr. test OFF
enter Main Diagnostic Menu item >
-------
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=64427&t=64427
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
