I believe the command you are looking for is "ip default-gateway . Since the 2950 is an IOS based switch, the set commands don't apply here.
""J. Johnson"" wrote in message news:[EMAIL PROTECTED] > All, > > Is there a way to set a default router for a 2950 switch? Apparently other > 2900 switches have the "set ip route default GATEWAYADDR" command (see > http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2900/cgcr29k/index.ht m > - thanks, Priscilla) but not, as far as I can tell, on the 2950 (see > http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12112cea/2950cr) FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]