Im trying to redirect telnet traffic from the pix to my Cisco 2511 terminal
server so I can access the devices over the internet.

I checked the previous post and tried to configure the Pix.  However the
traffic gets denied according to my syslog server.

 

Any help will be appreciated.

 

JB

 

 

PC----INTERNET----CABLE/MODEM----PIX501-----HUB----TERMINAL SERVER

 

 

 PIX501(config)# sh config

: Saved

:

PIX Version 6.1(4)

nameif ethernet0 outside security0

nameif ethernet1 inside security100

enable password 2KFQnbNIdI.2KYOU encrypted

passwd 2KFQnbNIdI.2KYOU encrypted

hostname PIX501

domain-name ciscopix.com

fixup protocol ftp 21

fixup protocol http 80

fixup protocol h323 1720

fixup protocol rsh 514

fixup protocol rtsp 554

fixup protocol smtp 25

fixup protocol sqlnet 1521

fixup protocol sip 5060

fixup protocol skinny 2000

names

access-list inbound permit icmp any any 

access-list 101 permit tcp any host 122.249.200.190 eq telnet 

pager lines 24

logging on

logging timestamp

logging trap notifications

logging host inside 192.168.1.20

interface ethernet0 10baset

interface ethernet1 10full

mtu outside 1500

mtu inside 1500

ip address outside dhcp setroute

ip address inside 192.168.1.1 255.255.255.0

ip audit info action alarm

ip audit attack action alarm

pdm location 192.168.1.5 255.255.255.255 inside

pdm location 192.168.1.20 255.255.255.255 inside

pdm logging informational 100

pdm history enable

arp timeout 14400

global (outside) 1 interface

nat (inside) 1 0.0.0.0 0.0.0.0 0 0

static (inside,outside) tcp 122.249.200.190 telnet 192.168.1.5 telnet
netmask 255.255.255.255 0 0

route outside 0.0.0.0 0.0.0.0 12.249.200.1 1

timeout xlate 3:00:00

timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323
0:05:00 sip 0:30:00 sip_media 0:02:00

timeout uauth 0:05:00 absolute

aaa-server TACACS+ protocol tacacs+ 

aaa-server RADIUS protocol radius 

http server enable

http 192.168.1.0 255.255.255.0 inside

no snmp-server location

no snmp-server contact

snmp-server community public

no snmp-server enable traps

floodguard enable

no sysopt route dnat

telnet timeout 5

ssh timeout 5

dhcpd lease 3600

dhcpd ping_timeout 750

terminal width 100

Cryptochecksum:69c02ec0dda407600fb27cb80979fcad

PIX501(config)#

 

 



Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=64786&t=64786
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to