MADMAN wrote: > > see "ip http server" IOS command. No special software > required. > IMHO stick to CLI ;)
Can your router be an HTTP server if you haven't configured at least an IP address which you would have to do in setup mode (or the CLI) using termianl software and the console port? Sorry for the stupid question but some vendors would give a new networking device some sort of default IP address, include it in the Getting Started guide and provide info on what the client address should be. Not Cisco? Cisco talks about friendly users, not user-friendly software. :-) I'm going to be teaching a bunch of newbies next quarter and I was thinking about showing them the HTTP configuration but haven't found anything decent on it and can't get to the routers yet. They are locked away. Thanks, Priscilla > > Dave > > Alan poettker wrote: > > Hi, > > Can anyone tell me where I may find specific information > reguarding > > cofiguring a 2600 series router with the GUI > interface..(through my internet > > browser). I would like to know what specific softare may be > required to do > > this or what settings I may need. I do have access to it > throush CLI mode. > -- > David Madland > CCIE# 2016 > Sr. Network Engineer > Qwest Communications > 612-664-3367 > > I would rather have a German division in front of me than a > French one > behind me." > --- General George S. Patton > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=65060&t=64937 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
