Hi Group, When i configured r6 with "ip igmp join-group" command it generated I graft message to the ustream router, but it did not generat a prune message when i entered "ip igmp join-group." Could some one just tell me why ?
BTW the network is runing dense mode multicast. Thanks John Tafasi r6(config-if)#ip igmp join-group 225.22.2.2 19:30:17: PIM: Building Graft message for 225.22.2.2, Serial0: no entries r6(config-if)# r6(config-if)# r6(config-if)#no ip igmp join-group 225.22.2.2 r6(config-if)#end r6# 19:37:15: %SYS-5-CONFIG_I: Configured from console by console 19:37:16: PIM: Send v2 Hello on Serial0 19:37:18: PIM: Received v2 Hello on Serial0 from 150.50.100.5 19:37:22: PIM: Received v2 Hello on Serial0 from 150.50.100.2 r6# r6# 19:37:46: PIM: Send v2 Hello on Serial0 19:37:48: PIM: Received v2 Hello on Serial0 from 150.50.100.5 19:37:52: PIM: Received v2 Hello on Serial0 from 150.50.100.2 19:38:16: PIM: Send v2 Hello on Serial0 19:38:18: PIM: Received v2 Hello on Serial0 from 150.50.100.5 19:38:22: PIM: Received v2 Hello on Serial0 from 150.50.100.2 19:38:46: PIM: Send v2 Hello on Serial0 19:38:48: PIM: Received v2 Hello on Serial0 from 150.50.100.5 19:38:52: PIM: Received v2 Hello on Serial0 from 150.50.100.2 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=65415&t=65415 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
