As per RFC draft-ietf-pim-dm-new-v2-03.txt " Prune messages are sent towards the upstream neighbor for S to indicate that traffic from S addressed to group G is not desired. In the case of two downstream routers A and B, where A wishes to continue receiving data and B does not, A will send a Join in response to B's Prune to override the Prune. This is the only situation in PIM-DM in which a Join message is used. Finally, a Graft message is used to re-join a previously pruned branch to the delivery tree"
Does it help? There is two times 'ip igmp join-group' in your emai. Do you mean 'no ip igmp join-group' on the second time? "John Tafasi" @groupstudy.com em 14/03/2003 07:41:35 Favor responder a "John Tafasi" Enviado Por: [EMAIL PROTECTED] Para: [EMAIL PROTECTED] cc: Assunto: R6 does not send prune message [7:65415] Hi Group, When i configured r6 with "ip igmp join-group" command it generated I graft message to the ustream router, but it did not generat a prune message when i entered "ip igmp join-group." Could some one just tell me why ? BTW the network is runing dense mode multicast. Thanks John Tafasi r6(config-if)#ip igmp join-group 225.22.2.2 19:30:17: PIM: Building Graft message for 225.22.2.2, Serial0: no entries r6(config-if)# r6(config-if)# r6(config-if)#no ip igmp join-group 225.22.2.2 r6(config-if)#end r6# 19:37:15: %SYS-5-CONFIG_I: Configured from console by console 19:37:16: PIM: Send v2 Hello on Serial0 19:37:18: PIM: Received v2 Hello on Serial0 from 150.50.100.5 19:37:22: PIM: Received v2 Hello on Serial0 from 150.50.100.2 r6# r6# 19:37:46: PIM: Send v2 Hello on Serial0 19:37:48: PIM: Received v2 Hello on Serial0 from 150.50.100.5 19:37:52: PIM: Received v2 Hello on Serial0 from 150.50.100.2 19:38:16: PIM: Send v2 Hello on Serial0 19:38:18: PIM: Received v2 Hello on Serial0 from 150.50.100.5 19:38:22: PIM: Received v2 Hello on Serial0 from 150.50.100.2 19:38:46: PIM: Send v2 Hello on Serial0 19:38:48: PIM: Received v2 Hello on Serial0 from 150.50.100.5 19:38:52: PIM: Received v2 Hello on Serial0 from 150.50.100.2 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=65435&t=65415 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]