Hello Jeff, Monday, August 2, 2004, 6:29:46 PM, you wrote:
JK> *** Save your clamav.conf *** DJM>> uninstall the existing clamav stuff: DJM>> cd ../clamav-0.70 DJM>> make uninstall DJM>> install the new stuff: DJM>> cd ../clamav-0.75 DJM>> make install DJM>> restart clamd DJM>> run freshclam DJM>> start qmailscan DJM>> start qmail JK> Everything worked except that I didn't save my clamav.conf before JK> running JK> uninstall, luckily I had a copy :-) JK> So I would suggest a slight change to the checklist JK> Graham, JK> What would you have changed in this setup?? These instructions JK> worked fine for me. Though, only a single small problem arose, during JK> the upgrade process I had uninstalled .70 and had not backed up my JK> current configuration ( the clamav.conf file ) as it removes the JK> installed clamav.conf from the pc when removing .70. Finding this out, I JK> was in quite a rush to get this file back and get clamav back up and JK> running. JK> I would suggest to anyone following this as simple directions to JK> upgrade, that they should backup there current config file ( clamav.conf JK> ) before upgrading the original version. that's what I wrote in my email *** Save your clamav.conf *** It was the only thing that caused me a problem Graham -- Graham K. Dodd Director of Operations Falk & Ross GmbH Tel: 06301 717 0 ------------------------------------------------------- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com _______________________________________________ Clamav-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/clamav-users
