Cat,
Are you connecting PCs behind IP phones? If yes then you need to add
your phones
to an ignore filter. If not make sure you SNMP write community
string is correct between
the switch and the CAM.
----------------------------
Jesse Dubois
[EMAIL PROTECTED]
919-392-6067
TAC AAA Team
RTP NC
9am - 5pm EST M-F
On Feb 6, 2008, at 11:42 AM, Cat Hoffman wrote:
My affected switches are 3750's to further add to the fun :)
-Cat
~~~~~~~~~~~~~~~~~~~~~~~~~~
Cat Hoffman
Network Infrastructure & Security Engineer
Office of Information Technology
Valparaiso University
1700 Chapel Drive, B13 Kretzmann Hall
Valparaiso, IN, 46383
Phone: (219)464-6101
~~~~~~~~~~~~~~~~~~~~~~~~~~
From: Daniel Sichel <[EMAIL PROTECTED]>
To: <[email protected]>
Date: 2/6/2008 10:32 AM
Subject: 4.1.3 kills clean access on switch
I've got a switch that no matter what I change on it to match the
other
switches that are working fine, as of the upgrade to 4.1.3 keeps
giving
OOB errors
(specifying that the user's mac address cannot be found). I turned
off
port-security and such on the ports...no help... made sure it is not
configured as the wrong
type of switch (as a search on the cisco site recommended that)...
I'm
running out of ideas. Any things you can all think of that I can do to
make the ports on that
switch go back to being friendly on CCA?
I have this identical issue and have a case open with TAC. So far
all I
know is that this doesn't happen in their lab using a 3560 switch. I
have informed my tech that while this may be true, it is not
germaine to
my 2950 that does have this happen.
Daniel Sichel, CCNP, MCSE,MCSA,MCTS (Windows 2008)
Network Engineer
Ponderosa Telephone (559) 868-6367
