Bill, I am not at work today, but the SNMP problem was only part of our issue. We had database corruption in Clean Access that prevented OOB from working with the 3750s. I rebuilt the manager & servers by hand after using Darik's Boot & Nuke to erase the CASs & CAM. (A CCA install does not wipe all old data.) Since we use HA, I just split the HA CAM.
I am convinced that after upgrading from 4.0.5 to 4.2.1 that there is again some minor database corruption. I am now hand building a 4.1.2.1 CAM and will upgrade the CASs to migrate to 4.1.2.1. Is this a new 4.1.2.1install or upgraded? At least part of our initial corruption issue was a result of custom jsp login pages. We stopped doing that :) I think our current corruption is a result of the database upgrade. There are several minor issues pointing to corruption. Maybe you can get a demo license to test if there is still a problem with a fresh install. I am fortunate to have a CCA system in our test lab for experimentation & testing. The IOS SNMP problem on a stack with more than one switch, would change the vlan on the wrong port, so the user would not get moved OOB. Is that similar to your problem? Bruce Osborne Liberty University -----Original Message----- From: Cisco Clean Access Users and Administrators [mailto:[EMAIL PROTECTED] On Behalf Of Bill Davis Sent: Friday, April 25, 2008 9:38 AM To: [email protected] Subject: Re: [CLEANACCESS] OOB error help? Bruce, We are running 12.2(40)SE on all our 3750s (WS-C3750-48TS). We upgraded to 12.2(40)SE from 12.2(25)SE in early January as a result of the two previous general SNMP failures, but have had 3 more re-occurrences since. We use a central deployment of CCA (4.1.2.1) in OOB virtual gateway mode . We plan to upgrade to 4.1.3 soon. -Bill
