Wang, Baojun wrote:
> Hi, list
>
> I'm building a clfs embedded for an x86 target(VIA EPIA mini-ITX) follow
> clfs embedded book stable version 1.0(svn trunk 2007/01/23 from the online
> book). after finish all steps(boot loader is grub), the boot process stoped
> after starting dhcp:
>
> Running start scripts.
> Starting syslogd: OK
> Starting klogd: OK
> Starting DHCP for interface eth0: OK
>
> dhcp is the last script under /etc/rc.d/start.
>
> lrwxrwxrwx 1 root root 16 Jan 25 14:07 S05syslog -> ../init.d/syslog
> lrwxrwxrwx 1 root root 17 Jan 25 14:07 S10network -> ../init.d/network
>
> and /etc/network.conf:
>
> root:/mnt/clfs-final/etc# cat network.conf
> # /etc/network.conf
> # Global Networking Configuration
> # interface configuration is in /etc/network.d/
>
> # set to yes to enable networking
> NETWORKING=yes
>
> # set to yes to set default route to gateway
> USE_GATEWAY=no
>
> # set to gateway IP address
> GATEWAY=192.168.1.1
>
> and..
>
> root:/mnt/clfs-final/etc# cat network.conf
> # /etc/network.conf
> # Global Networking Configuration
> # interface configuration is in /etc/network.d/
>
> # set to yes to enable networking
> NETWORKING=yes
>
> # set to yes to set default route to gateway
> USE_GATEWAY=no
>
> # set to gateway IP address
> GATEWAY=192.168.1.1
> root:/mnt/clfs-final/etc# cat network.d/interface.eth0
> # Network Interface Configuration
>
> # network device name
> INTERFACE=eth0
>
> # set to yes to use DHCP instead of the settings below
> DHCP=yes
>
> # IP address
> # IPADDRESS=192.168.1.2
>
> # netmask
> # NETMASK=255.255.255.0
>
> # broadcast address
> # BROADCAST=192.168.1.255
>
> after that nothing going on any more, but the system doesn't die, because I
> can type with keyboard. Also it shouldn't the dhcp problem, because I ever
> added some other scripts after dhcp and it's ok. sounds like the login
> program refuse(or avoid) to run?
>
> busybox version is 1.2.2.1(have some modification on the default clfs
> configuration or else busybox fail to run, basically is unset
> CONFIG_FEATURE_SH_STANDALONE_SHELL). my /etc/inittab:
>
> root:/mnt/clfs-final/etc# cat inittab
> # /etc/inittab
>
> ::sysinit:/etc/rc.d/startup
>
> tty1::respawn:/sbin/getty 38400 tty1
> tty2::respawn:/sbin/getty 38400 tty2
> tty3::respawn:/sbin/getty 38400 tty3
> tty4::respawn:/sbin/getty 38400 tty4
> tty5::respawn:/sbin/getty 38400 tty5
> tty6::respawn:/sbin/getty 38400 tty6
>
> # Put a getty on the serial line (for a terminal)
> # uncomment this line if your using a serial console
> ::respawn:/sbin/getty -L ttyS0 115200 vt100
>
> ::shutdown:/etc/rc.d/shutdown
> ::ctrlaltdel:/sbin/reboot
>
>
> would you please give me some suggestions? Thanks in advance!
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Clfs-support mailing list
> [email protected]
> http://lists.cross-lfs.org/cgi-bin/mailman/listinfo/clfs-support
>
That's wierd, can you try the latest busybox to see if the problem has
been fixed?
_______________________________________________
Clfs-support mailing list
[email protected]
http://lists.cross-lfs.org/cgi-bin/mailman/listinfo/clfs-support
