You don't need CSP at all for advanced networking, CSP is only required for basic networking and layer-3 security groups, AFAIK.
---------------------------------------- From: "Ahmad Emneina" <[email protected]> Sent: Friday, November 02, 2012 4:28 PM To: "[email protected]" <[email protected]> Subject: Re: Xenserver Shared Public Network The docs don¹t explicitly say don¹t install CSP for advanced installs. It does speak to it being a step in the basic zone installation section. Trevor, I think youre on the right track to getting your cat pelt. I do this exact same thing in a couple clouds I have provisioned. Make sure VLAN 10 has an interface on your switch that routes, giving the vlan interface an ip address to be used as the gateway for your shared network. On 11/1/12 8:59 PM, "Trevor Francis" <[email protected]> wrote: >Hmm, that isn't represented in the docs (3.02 or 4.0)S Not quite sure how >to remove it. > >Yes, I am running an advanced network because I have 3 physical bonds on >my hosts and it is my intent to direct assign a public ip address and a >private ip address to my VMs. > >Is there a better way to skin a cat? I can't do NAT because of the nature >of the application deployed over the cloud instances. > >TGF > > >On Nov 1, 2012, at 10:55 PM, Kirk Kosinski <[email protected]> wrote: > >> Hi, Trevor. Are you using a basic zone with Security Groups? It sounds >> like you aren't since you mentioned creating multiple shared networks. >> You should not install the CSP on XS hosts in an advanced zone or a >> basic zone without SGs. Doing so can result in network connectivity >> issues for VMs. >> >> Best regards, >> Kirk >> >> On 11/01/2012 08:42 PM, Trevor Francis wrote: >>> yeap. >>> >>> On Nov 1, 2012, at 10:38 PM, "Kristoffer Sheather - Cloud Central" >>><[email protected]> wrote: >>> >>>> Have you installed the XenServer Cloud Support Pack (CSP)? >>>> >>>> ---------------------------------------- >>>> From: "Trevor Francis" <[email protected]> >>>> Sent: Friday, November 02, 2012 2:24 PM >>>> To: "[email protected]" >>>> <[email protected]> >>>> Subject: Xenserver Shared Public Network >>>> >>>> So, I abandoned KVM due to Bonding floods that the community was >>>>unable to >>>> resolve. I have no idea why it was happening. >>>> >>>> Anyway. I am now on XS 6.02 and trying to deploy my network. I have >>>>created >>>> a shared public network and a shared private network. I have both >>>>VLANS in >>>> my switches (10 = public, and 11 = private). There is a VR for the >>>>shared >>>> public network, just being used to hand out dhcp. The guest VMs can >>>>get out >>>> on the isolated private network, but are unable to get out on the >>>>shared >>>> public network. Both networks are able to pull dhcp from their >>>>respective >>>> virtual routers. >>>> >>>> The VMs cannot ping any system VMs (even though they reside on the >>>>same >>>> physical host) and the host cannot ping the vms. >>>> >>>> Any thoughts? >>>> >>>> TGF >>>> >>>> >>> > > -- Æ
