Yea, I’m all for leaving well enough alone, but my concern is that with this model there is no inner wire for the furler. The furler is the forestay. If the top or bottom assembly give out, the forestay is gone. So I’m thinking a little preventive maintenance is prudent.
I get the feeling this make/model is relatively rare, but hoping someone out there has worked on it. Thanks, From: cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rich Knowles Sent: Saturday, September 08, 2012 11:54 AM To: cnc-list@cnc-list.com Subject: Re: Stus-List Stearn Twinstay 18 Not malfunctioning? I'd leave it alone. Save up for a replacement. The new furlers work much easier. Rich On 2012-09-08, at 12:03, "Pete Shelquist" <pete.shelqu...@comcast.net> wrote: I have a Stearn Twinstay 18 for a forestay/roller furler. It’s still working ok, but since I don’t know how long it’s been since the bearings have been looked at, I’m considering taking it off over the winter and rebuilding it. Does anyone on the list have this model and done the rebuild? Thanks, _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com _____ No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.2197 / Virus Database: 2437/5256 - Release Date: 09/08/12
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
