Mine have vinyl that matches the headliner over plywood. The side panels have screws with covers. Center ones are Velcro. I'll check McMaster.
Joel Aronson On Nov 13, 2012, at 10:16 PM, "Dennis C." <capt...@yahoo.com> wrote: > Joel, > > Not sure what your access panels look like. I replaced the headliner access > panels on my 35-1 with some white plastic sheets from mcmaster.com. The > sheets were smooth on one side, textured on the other. I think I used 1/8 > inch thick. > > Dennis C. > Touché 35-1 #83 > Mandeville, LA > > Sent from my iPhone > > On Nov 13, 2012, at 12:43 PM, Joel Aronson <joel.aron...@gmail.com> wrote: > >> Several of the panels have delaminated. 1/4 inch plywood would be too >> thick. Is there a better replacement? Has anyone either re-used the vinyl >> or found a replacement? What glue would you use? >> >> Thanks! >> >> -- >> Joel >> 301 541 8551 >> _______________________________________________ >> This List is provided by the C&C Photo Album >> http://www.cncphotoalbum.com >> CnC-List@cnc-list.com > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com