Alex I had the old white plastic also...it was yellowed as well...I replaced it with the solid white Plexiglas, and I used 1/8 inch thick...if I ever do it again I would try 1/4 inch thick because the 1/8 inch thick has warped between some fasteners or I might check a sheet of Formica as someone on the list suggested the other day or that white FRP stuff that Rich Knowles advised about but I am not sure where to get it, I expect that Rich will help me with that when I need it...I checked out Formica when I did the replacement every piece I saw had a black subsurface which showed a black edge when cut.
Dwight Veinot C&C 35 MKII, Alianna Head of St. Margaret's Bay, NS -----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Alex Giannelia Sent: November 15, 2012 11:31 AM To: cnc-list@cnc-list.com Subject: Stus-List Headliner access panels Now you have my interest, as my 35-II had plastic panels in various shapes screwed directly into the headliner. These are suffering from old age and are yellowing etc and in 2 cases are cracked and now that my deck work is done, I am proposing to replace them all, so are you saying in the 35-III These are normally plywood glued and/or velcroed in place? Does anyone on this list with a 35-II have what I described? Dwight what do you have? BTW, these only apply to original equipment deck installs. In some areas where the P.O. or I put in newer hardware, we had to go through the core and I ended up using SS backing plates I polished and fastened with cap nuts. Just polling the list. ALEX GIANNELIA CC 35-II (1974) WILL BE RENAMED ON THE HARD SINCE NOV. 2006 Toronto Ontario _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.2221 / Virus Database: 2441/5396 - Release Date: 11/15/12 _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
