Paul,
Thanks for the response. The16 is a bit too big for the job and the space available but I will keep it in mind for any future applications. I will soon have a couple of Barient 22's on my hands that I am replacing with Lewmar ST 40 EVO winches. John From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Paul Baker Sent: Saturday, November 30, 2013 10:57 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Barient# 10 winch I have a pair of stainless Barient 16 I want to sell, bigger is always better :) On 13-11-30 05:31 PM, John Russo wrote: I am looking for a vintage 1984 or later Barient #10 winch to match the mainsheet winch on my 1984 C&C 32 located on my cabin top port side. I intend to use the 2nd winch on the starboard cabin top aft of the traveler. I had a 2nd or 3rd hand Barient #10P there which did not do the job. It is for multipurpose use to be positioned aft of a Lewmar triple clutch for my main halyard , outhaul, and Vang. The #10 that I have on the Port cabin top measures 4&3/8 at the base and is 3&3/4 tall. It is greyish-Maroon in color and I assume Aluminum as the 1984 -32 spec calls that out. I have checked out Ebay and there are some #10's listed but none with the above dimensions or AL. Any suggestions as to where I can find one? Thanks John Arpeggio Norwalk CT _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com