Interesting – My 10 P measures 4” Dia and 3-1/2 in high. Weird!
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Brent Driedger Sent: Wednesday, December 04, 2013 10:51 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Barient# 10 winch Hi John. That's exactly the dimensions. It's a 10P. I'll try to send a picture. The cracked one is in my workshop but the good one is tucked away on my boat for the winter. It feels like aluminium Brent. Sent from my iPhone On Dec 4, 2013, at 9:43 PM, John Russo <johnrussob...@optonline.net> wrote: Brent the 22’s are two speed and now I will probably not get them off the boat until spring and am sort of contemplating their use for the spinnaker. Won’t know for a bit . Does your good #10 measure 4-3/8” Diameter at the Drum base and 3-3/4 ‘ high? A quick peek under the base should tell you the material or I could look up the weight to try to determine it. John From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Brent Driedger Sent: Tuesday, December 03, 2013 9:57 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Barient# 10 winch John, the Barient 22s have got my attention. My mkV came with 18s and I find them slightly under powered when I'm in the "should be putting up the 100" zone. I happen to have a couple of Barient 10s sitting around that I was going to add to the cabin top arrangement. One unfortunately has a crack in the uppermost portion but the other is perfect. They are 1984 black ones of whatever Dwarfian material they are made of. Let me know what you want for the 22s. Are they 2 speed? Brent Driedger C&C 27-V Frozen Lake Winnipeg. Sent from my iPhone On Dec 2, 2013, at 7:19 PM, John Russo <johnrussob...@optonline.net> wrote: Paul, Thanks for the response. The16 is a bit too big for the job and the space available but I will keep it in mind for any future applications. I will soon have a couple of Barient 22’s on my hands that I am replacing with Lewmar ST 40 EVO winches. John From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Paul Baker Sent: Saturday, November 30, 2013 10:57 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Barient# 10 winch I have a pair of stainless Barient 16 I want to sell, bigger is always better :) On 13-11-30 05:31 PM, John Russo wrote: I am looking for a vintage 1984 or later Barient #10 winch to match the mainsheet winch on my 1984 C&C 32 located on my cabin top port side. I intend to use the 2nd winch on the starboard cabin top aft of the traveler. I had a 2nd or 3rd hand Barient #10P there which did not do the job. It is for multipurpose use to be positioned aft of a Lewmar triple clutch for my main halyard , outhaul, and Vang. The #10 that I have on the Port cabin top measures 4&3/8 at the base and is 3&3/4 tall. It is greyish-Maroon in color and I assume Aluminum as the 1984 -32 spec calls that out. I have checked out Ebay and there are some #10’s listed but none with the above dimensions or AL. Any suggestions as to where I can find one? Thanks John Arpeggio Norwalk CT _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
