There must be a ton of them around somewhere after Sandy, etc. One of the listers was parting his broken boat out, a search in the archives might give a clue.
Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC On 4 February 2014 23:41, Kevin Driscoll <kevindrisc...@gmail.com> wrote: > I am in the same boat (pun intended). We have one broken in the aft cabin > on our 30mkII. Let me know if you find one Robert or an alternative > solution i.e. epoxy. > > Best, > Kevin > > > > Kevin Driscoll > Portland, Oregon > 503 // 875 // 3493 > > > On Tue, Feb 4, 2014 at 8:07 AM, Robert Gallagher <trys...@gmail.com>wrote: > >> Hi All, >> >> I need to replace one of the interior plastic(?) hand holds that C&C used >> as corner molding on their late 80's to 90's boats like the 30 MKII, 34+, >> etc. >> Hard to explain but if you have one of these boats you will know what I >> mean. >> There is one located on the port side of the shelf that in part of the >> companion way interior steps. >> Here is a link to a photo of the broken hand hold. >> >> A higher quality material would be ideal. >> >> >> http://s1294.photobucket.com/user/Trysail1/media/IMG_0100_zps4bfbf267.jpg.html >> >> Thanks, >> >> Rob >> >> _______________________________________________ >> This List is provided by the C&C Photo Album >> http://www.cncphotoalbum.com >> CnC-List@cnc-list.com >> >> > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > >
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
