John,

FYI, My 32 came with a gate on the upper rail from the factory.  Hull number 
1197.

Tom Anderson
C&C 32 Nonpareil
Marblehead, MA

95 days to launch
97 days to first Wednesday Night Race


> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of John Russo
> Sent: Wednesday, February 05, 2014 2:34 PM
> To: cnc-list@cnc-list.com
> Subject: Re: Stus-List Climing over the stern rail is a pain
> 
> 
> I have a 32 with a double rail at the stern and am thinking about cutting the 
> upper and adding a gate. My swim ladder actually comes slightly above the 
> lower rail when up where it tie it. My concern is that I have a motor mount 
> and  a 65 Lb outboard on the stern rail port side vertical post which I will 
> have to shift more to port but wondered about the rail strength after 
> cutting. Any thoughts?   I am also looking for a lighter outboard with a 
> little less HP.
> 
> John
> Arpeggio 32
> Norwalk CT
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Reply via email to