John, you sure about that hull number? I didn't think they made that many. I'm hull #59.
Steve Suhana, C&C 32 Toronto On Wed, Feb 5, 2014 at 6:03 PM, Tom Anderson <t...@nonpareilracing.com>wrote: > John, > > FYI, My 32 came with a gate on the upper rail from the factory. Hull > number 1197. > > Tom Anderson > C&C 32 Nonpareil > Marblehead, MA > > 95 days to launch > 97 days to first Wednesday Night Race > > > From: CnC-List > [mailto:cnc-list-boun...@cnc-list.com<cnc-list-boun...@cnc-list.com>] > On Behalf Of John Russo > > Sent: Wednesday, February 05, 2014 2:34 PM > > To: cnc-list@cnc-list.com > > Subject: Re: Stus-List Climing over the stern rail is a pain > > > > I have a 32 with a double rail at the stern and am thinking about cutting > the upper and adding a gate. My swim ladder actually comes slightly above > the lower rail when up where it tie it. My concern is that I have a motor > mount and a 65 Lb outboard on the stern rail port side vertical post which > I will have to shift more to port but wondered about the rail strength > after cutting. Any thoughts? I am also looking for a lighter outboard > with a little less HP. > > > John > > Arpeggio 32 > > Norwalk CT > > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > >
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com