Duh! I'll find out shortly. Rich
> On Feb 20, 2014, at 14:42, Frederick G Street <f...@postaudio.net> wrote: > > Steve — I just checked the manual, and it looks like the a Series power cable > will NOT fit the e Series. Sorry! > > Fred Street -- Minneapolis > S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^( > >> On Feb 20, 2014, at 12:35 PM, Frederick G Street <f...@postaudio.net> wrote: >> >> But he doesn’t have the power cable. >> >> If it’s the same cable as the a75, I can send you mine to use for your >> archiving. Let me know. >> >> — Fred >> >> Fred Street -- Minneapolis >> S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^( >> >>> On Feb 20, 2014, at 12:27 PM, Rich Knowles <r...@sailpower.ca> wrote: >>> >>> Red should be positive and black negative. >>> >>> Rich >>> >>>> On Feb 20, 2014, at 14:06, OldSteveH <oldste...@sympatico.ca> wrote: >>>> >>>> Hello all, I have my E7 at home and want to send it for replacement under >>>> their recall. >>>> I need to power it up to archive my routes and waypoints however the wiring >>>> harness is at the boat (2.5 hours away). >>>> The + and - power pins on the connector are obvious, but does anyone know >>>> which is which, I am afraid of reversing polarity and damaging the unit. >>>> I checked the manual and searched online but came up with nothing. Also >>>> checked resistance between pins and casing to ID the negative pin. >>>> However probably due to capacitance on the board, there are funky >>>> resistance >>>> readings and its hard to tell which pin is ground. >> >> _______________________________________________ >> This List is provided by the C&C Photo Album >> http://www.cncphotoalbum.com >> CnC-List@cnc-list.com > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
