Dennis Thanks Lewmar had great product but IS 37 is much larger boat. V /R Frank
Sent from my iPhone > On Apr 10, 2014, at 3:42 PM, "Dennis C." <capt...@gmail.com> wrote: > > Frank, > > I just installed a Lewmar V-2 vertical windlass on an Island Packet 37 on the > bowsprit. Probably not similar to your installation but just wanted to say I > was impressed with the design and quality of the Lewmar windlass. > > Dennis C. > Touche' 35-1 #83 > Mandeville, LA > > >> On Thu, Apr 10, 2014 at 1:14 PM, Frank Woronkowicz <fworonkow...@gmail.com> >> wrote: >> My boat has Yanmar 3QM30 with original added fresh water circ. jabsco pump >> and Sunrod HEx. overheating on the Chesapeake Bay. I think to replace engine >> and propeller. Please let me know if any LF owner already did this work and >> what is approx cost. >> The second question is windllas type and installation. Did anybody install >> windlass in anchor compartment? >> I have her for approx. 20 years and finally these should be done, >> Thanks >> Frank Woronkowicz >> LF 38 s/y Gdynia >> ANNAPOLIS MD >> fworonkow...@gmail.com >> >> Sent from my iPhone >> >>> On Apr 10, 2014, at 1:43 PM, "Bill Coleman" <colt...@verizon.net> wrote: >>> >>> I wish you had posted this a month ago! >>> >>> I just bought two different kinds of Lubriplate waterproof grease to lather >>> up my prop gears (which are exposed) >>> >>> So far none have survived the summer. >>> >>> >>> >>> This looks like it might stay. >>> >>> >>> >>> Bill Coleman >>> >>> C&C 39 <image001.gif> >>> >>> >>> >>> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jim Watts >>> Sent: Wednesday, April 09, 2014 10:28 PM >>> To: 1 CnC List >>> Subject: Re: Stus-List LF 38 rudder post grease fitting (again) >>> >>> >>> >>> If it's a bearing, it's plastic, probably Delrin (Acetal). Teflon grease is >>> wax-based, so safe on either. Star Brite has a tub of Teflon grease for not >>> too stupid a price. http://www.starbrite.com/item/white-ptef-lubricant >>> >>> >>> >>> >>> Jim Watts >>> Paradigm Shift >>> C&C 35 Mk III >>> Victoria, BC >>> >>> >>> >>> On 9 April 2014 09:29, Della Barba, Joe <joe.della.ba...@ssa.gov> wrote: >>> >>> On the 35 there is no bearing. It is just a metal shaft in a fiberglass >>> tube. >>> >>> >>> >>> Joe Della Barba >>> >>> Coquina >>> >>> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Daniel >>> Sheer >>> Sent: Wednesday, April 09, 2014 12:13 PM >>> To: cnc-list@cnc-list.com >>> Subject: Stus-List LF 38 rudder post grease fitting (again) >>> >>> >>> >>> Anybody know whether the bearing is metal or plastic? Trying to figure out >>> what grease to use. >>> >>> >>> >>> Dan Sheer >>> >>> Pegathy LF38 >>> >>> Rock Creek off the Patapsco >>> >>> >>> _______________________________________________ >>> This List is provided by the C&C Photo Album >>> http://www.cncphotoalbum.com >>> CnC-List@cnc-list.com >>> >>> >>> >>> _______________________________________________ >>> This List is provided by the C&C Photo Album >>> http://www.cncphotoalbum.com >>> CnC-List@cnc-list.com >> >> _______________________________________________ >> This List is provided by the C&C Photo Album >> http://www.cncphotoalbum.com >> CnC-List@cnc-list.com > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com