Ah, the infamous Yanmar click. Basically, the Yanmar wiring harness is substandard. Originally, I replaced a crappy fuse in the harness and the click didn’t happen so much. I eventually bypassed the harness and replaced it with larger, tinned wire. Problem solved.
Jack Brennan Former C&C 25 Shanachie, 1974 Bristol 30 Tierra Verde, Fl. From: Kevin Driscoll via CnC-List Sent: Friday, June 27, 2014 11:40 AM To: cnc-list@cnc-list.com Subject: Stus-List Yanmar 2GM20 Starter Not Starting / Engaging Hi Everybody, My starter is beginning to misbehave a bit. Looking for help diagnosing issue. Symptom: Occasionally (with more frequency now) I will press the starter button on my Yanmar 2GM20 and nothing happens. No, turning over, etc. Just crickets. Then I take my finger off and try it again and it starts to turn over fine. Occasionally I have to press twice before it will start to engage. Any ideas? When this happened on my classic BMW motorcycle, it was my starter relay. Could it be the same on my Yanmar? Whatever it is it seems electrical rather than mechanical. Thanks! Kevin 30-2 Kevin Driscoll Portland, Oregon 503 // 875 // 3493 -------------------------------------------------------------------------------- _______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com
_______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
