Coquina is on about the 4th or 5th depth finder with the 200 KHz transducer that was installed the first time we hauled out after we bought her in 1977.
Joe Della Barba j...@dellabarba.com Coquina C&C 35 MK I -----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Brad Crawford via CnC-List Sent: Friday, June 27, 2014 9:21 PM To: CnC-List@cnc-list.com Subject: Stus-List Signet SL 172 Depth Gauge My Coastal Navigator DDS 200 depth gauge which is no longer in business seems to have retired itself. I'm thinking the instrument itself has gone bad, not the transducer. We just had the boat out of the water in April for fresh bottom paint, so I really don't want to pull her out again to replace the transducer. I'm hoping the existing transducer will work with a new depth gauge instrument such as a Signet SL172 depth gauge. I talked to Signet and they believe it should work, as most transducers operate on 200 kHz. Just wondering if anyone has had any experience with replacing their depth gauge using the existing transducer, what kind did you use, and did it work ok? I'm thinking about the Signet Gauge to match the existing knot log, wind speed, and apparent wind indicator, which are all Signet. Any suggestions? Thanks, Brad 81' CnC 36 Seattle Sent from my iPad _______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
