would say, your battery is low (more or less damaged). In this case
voltage will decrease during starting the engine and computer will shut
down. I had same last year, new battery, everything fine again.
best regards
Peter
Am 07.07.2014 19:31, schrieb Della Barba, Joe via CnC-List:
Yes! I can start my engine all day and none of the boat equipment knows the
difference.
Joe Della Barba
Coquina
-----Original Message-----
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rich Knowles
via CnC-List
Sent: Monday, July 07, 2014 12:23 PM
To: Eric Frank; cnc-list@cnc-list.com
Subject: Re: Stus-List E7 chartplotter reboots when I start the engine
Time to re wire your boat to have an isolated starting battery and a house
battery. That will eliminate most of your charging/starting/low voltage
problems.
Here's my take on it:
http://www.sailpower.ca/pleasure-boat-primary-wiring/
Rich
On Jul 7, 2014, at 13:18, Eric Frank via CnC-List <cnc-list@cnc-list.com> wrote:
maintains enough voltage to the E7 when the main voltage
_______________________________________________
This List is provided by the C&C Photo Album
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________
This List is provided by the C&C Photo Album
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________
This List is provided by the C&C Photo Album
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com