A friend of mine had that problem, and he bought a little widget to isolate the chartplotter and maintain voltage, kind of like a little voltage conditioner. Search on defender or West. Bill Coleman C&C 39
-----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Della Barba, Joe via CnC-List Sent: Monday, July 07, 2014 1:31 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List E7 chartplotter reboots when I start the engine Yes! I can start my engine all day and none of the boat equipment knows the difference. Joe Della Barba Coquina -----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rich Knowles via CnC-List Sent: Monday, July 07, 2014 12:23 PM To: Eric Frank; cnc-list@cnc-list.com Subject: Re: Stus-List E7 chartplotter reboots when I start the engine Time to re wire your boat to have an isolated starting battery and a house battery. That will eliminate most of your charging/starting/low voltage problems. Here's my take on it: http://www.sailpower.ca/pleasure-boat-primary-wiring/ Rich > On Jul 7, 2014, at 13:18, Eric Frank via CnC-List <cnc-list@cnc-list.com> wrote: > > maintains enough voltage to the E7 when the main voltage _______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
