Mike, I used butyl tape when I replaced my companionway hatch. It is foolproof stuff to work with and seals great.
Jake Jake Brodersen Midnight Mistress C&C 35 Mk-III Hampton VA -----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Michael Crombie via CnC-List Sent: Monday, September 08, 2014 10:41 AM To: cnc-list@cnc-list.com Subject: Stus-List Companionway hood A couple of the screws are loose on my companionway hood, so I am planning on removing it and giving it a good cleaning (and cleaning the gunk underneath it). What type of sealant should i put into the screwholes when I put it back on? 4200? Silicon? Any advice would be appreciated. There seemed to be quite the debate a few years ago about whether to seal the entire underside or not. Mine only appears to have sealant around the screws and i don't have any leaks (at least not around the companionway!) , so I'll probably stick with that method. Thanks, Mike Atacama C&C 33 Mk II Toronto Sent wirelessly from my BlackBerry device on the Bell network. Envoyé sans fil par mon terminal mobile BlackBerry sur le réseau de Bell. _______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
