Don, James at Dockside Marine in Bronte carries butyl ....
Sent from my iPad > On Sep 8, 2014, at 10:49 PM, "D Harben via CnC-List" <cnc-list@cnc-list.com> > wrote: > > Hi > I am interested in at least one roll, perhaps 3, if long term storage is not > a problem. > > Don > Oakville > >> On Sep 8, 2014, at 10:47 PM, Marek Dziedzic via CnC-List >> <cnc-list@cnc-list.com> wrote: >> >> If you are looking for the source, here they are. I bought mine from Compass >> Marine. It seems that the other one can sell smaller quantities. >> >> There is a downside to it: if you want it shipped to Canada, the cost is >> about the same as the tape (around $30). It is worth its while to order more >> (cost of shipping is the same) and share. >> >> Btw. I can share one roll at cost (and it is already on the Canadian side of >> the border). >> >> Btw2. No association with either of them, but supposedly this is the best >> butyl tape around. >> >> Bed-It Tape - Compass Marine http://www.pbase.com/mainecruising/butyl_tape >> >> Bed-It Tape - Hamilton Marine >> http://store.hamiltonmarine.com/browse.cfm/butyl-tape-bed-it-1-2-x-50-roll-7 >> 55207-/4,59595.html >> >> Marek >> >> -----Original Message----- >> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jake >> Brodersen via CnC-List >> Sent: Monday, September 08, 2014 7:55 PM >> To: mcrom...@bell.blackberry.net; cnc-list@cnc-list.com >> Subject: Re: Stus-List Companionway hood >> >> Mike, >> >> I used butyl tape when I replaced my companionway hatch. It is foolproof >> stuff to work with and seals great. >> >> Jake >> >> Jake Brodersen >> “Midnight Mistress” >> C&C 35 Mk-III >> Hampton VA >> >> >> >> -----Original Message----- >> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Michael >> Crombie via CnC-List >> Sent: Monday, September 08, 2014 10:41 AM >> To: cnc-list@cnc-list.com >> Subject: Stus-List Companionway hood >> >> >> A couple of the screws are loose on my companionway hood, so I am planning >> on removing it and giving it a good cleaning (and cleaning the gunk >> underneath it). >> >> What type of sealant should i put into the screwholes when I put it back on? >> 4200? Silicon? Any advice would be appreciated. >> >> There seemed to be quite the debate a few years ago about whether to seal >> the entire underside or not. Mine only appears to have sealant around the >> screws and i don't have any leaks (at least not around the companionway!) , >> so I'll probably stick with that method. >> >> Thanks, >> >> Mike >> Atacama C&C 33 Mk II >> Toronto >> Sent wirelessly from my BlackBerry device on the Bell network. >> Envoyé sans fil par mon terminal mobile BlackBerry sur le réseau de Bell. >> _______________________________________________ >> This List is provided by the C&C Photo Album >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go bottom of >> page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> >> _______________________________________________ >> This List is provided by the C&C Photo Album >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go bottom of >> page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> >> _______________________________________________ >> This List is provided by the C&C Photo Album >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go bottom of >> page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > _______________________________________________ > This List is provided by the C&C Photo Album > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go bottom of page > at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > _______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
