I may have a related problem - and would like help to diagnose the cause before it becomes a significant issue.
>From time to time - not sure if it is getting more frequent - with the key >turned, battery on and fully charged - I get nothing - not even a clunk - when >I press the button. I press it a second time and 99% of the time the engine >fires right up. Have any listers experienced the same - and help me identify the problem so I can fix it before I get to the stage where I can't start the engine at all. -- Jonathan Indigo C&C 35III SOUTHPORT CT > On Sep 17, 2014, at 7:29, Nauset Beach via CnC-List <cnc-list@cnc-list.com> > wrote: > > Nate > > Had the same issue last week on my Yanmar 3GM30F with a B Type engine panel. > Was getting near complete voltage drop across the 2 terminals of the key > switch when the key was turned on and nothing from the button. Turned out > to be the wiring harness plug at the back of the panel. Most of the wires > were corroded inside the plug though all looked well from the outside. The > plug was cut out and the wires connected directly. Works like a charm. > > So as Dave said, check all your wiring in the start circuit before you start > throwing $$$ at it replacing parts. > > Brian > > -----Original Message----- > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dave > Godwin via CnC-List > Sent: Tuesday, September 16, 2014 8:16 PM > To: Nate Flesness; cnc-list@cnc-list.com > Subject: Re: Stus-List Yanmar push button died > > Nate, it may not be the switch. I have an original in perfect working > condition if catch my drift... > > Check your battery ground/cabling/connections. Let me know if it is the > switch and if so, you can have it. > > Dave > 1982 C&C 37 -Ronin > > Sent from my iPad > >>> On Sep 16, 2014, at 19:55, Nate Flesness via CnC-List >> <cnc-list@cnc-list.com> wrote: >> >> I have a 2QM15 yanmar - after a few intermittents, my engine start button > has failed completely. Someone knew what Cole-Hersee switch can replace it - > anyone remember, or have another suggestion? >> >> Nate >> Sarah Jean >> 1980 30-1 >> Siskiwit Bay Marina >> Lake Superior >> _______________________________________________ >> This List is provided by the C&C Photo Album >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go bottom of > page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > _______________________________________________ > This List is provided by the C&C Photo Album > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go bottom of > page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > > > _______________________________________________ > This List is provided by the C&C Photo Album > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go bottom of page > at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > _______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com