Paint thinner works well to remove those pesky spots DDrake 73 JH C&C 26
> On Oct 15, 2014, at 4:21 PM, Bill Coleman via CnC-List > <cnc-list@cnc-list.com> wrote: > > I think that may work right after installation, but at least in my case it > was a year or so B4 the mess occurred (Hot Summers) and then that is more > difficult. > > Regards, > > Bill > > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Josh > Muckley via CnC-List > Sent: Wednesday, October 15, 2014 4:16 PM > To: Hoyt, Mike; C&C List > Subject: Re: Stus-List Butyl > > Anybody have any luck using a small ball of fresh butyl to pick up the > residue and excess? > > On Oct 15, 2014 9:34 AM, "Hoyt, Mike via CnC-List" <cnc-list@cnc-list.com> > wrote: > The one thing I have always hated about Butyl was trying to remove it from > where it was not wanted. Old fittings being rebidded that had been using > butyl would always result in butyl stuck everywhere on non skid and nearly > impossible to remove. Is there some sort of cleaner/solvent that rids us of > that? > > Mike > Still sailing in Nova Scotia on Persistence > > > _______________________________________________ > This List is provided by the C&C Photo Album > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go bottom of page > at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > _______________________________________________ > This List is provided by the C&C Photo Album > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go bottom of page > at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >
_______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
