Interlux Special Thinner 216 dissolves butyl beautifully and leaves no noticeable residue. I use it to prep many surfaces for painting or caulking.
Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC On 16 October 2014 20:11, Dennis C. via CnC-List <cnc-list@cnc-list.com> wrote: > Goo Gone or similar. Final clean with denatured alcohol. > > BTW, denatured alcohol removes uncured, repeat uncured, 5200 well. > > Dennis C. > Touche' 35-1 #83 > Mandeville, LA > > On Thu, Oct 16, 2014 at 7:45 PM, Robert Abbott via CnC-List < > cnc-list@cnc-list.com> wrote: > >> But the question was "what would remove butyl where it was not >> wanted". Agreed varsol and paint thinner leave an 'oily film'.....why >> wouldn't they, they are petroleum based. >> >> But varsol and paint thinner will remove butyl and will not harm your >> deck paint any more than the splashing of diesel fuel we apply to our deck >> paint, annually! >> >> So clean any space that needs proper sealing, clean it after the butyl is >> removed with TSP and/or acetone if the substrate can tolerate acetone. >> >> What product would you recommend Mike use to clean his unwanted butyl ? >> >> Rob Abbott >> AZURA >> C&C 32 - 84 >> Halifax, N.S. >> >> >> >> >> On 2014/10/15 1:50 PM, Letsgo Sailing via CnC-List wrote: >> >> My experiance with varsol and paint thinner is that they leave residue >> that prevents proper sealing. >> >> --- Original Message --- >> >> From: "Robert Abbott via CnC-List" <cnc-list@cnc-list.com> >> <cnc-list@cnc-list.com> >> Sent: 15 October, 2014 11:30 AM >> To: "Hoyt, Mike" <mike.h...@impgroup.com> <mike.h...@impgroup.com>, >> cnc-list@cnc-list.com >> Subject: Stus-List Butyl >> >> Mike: >> Varsol or any paint thinner will clean butyl. >> >> Rob Abbott >> AZURA >> C&C 32 - 84 >> Halifax, N.S. >> >> Unstepped the mast yesterday.....being hauled out any day now! >> >> >> >> >> On 2014/10/15 10:34 AM, Hoyt, Mike via CnC-List wrote: >> >> The one thing I have always hated about Butyl was trying to remove it >> from where it was not wanted. Old fittings being rebidded that had been >> using butyl would always result in butyl stuck everywhere on non skid and >> nearly impossible to remove. Is there some sort of cleaner/solvent that >> rids us of that? >> >> >> >> Mike >> >> Still sailing in Nova Scotia on Persistence >> >> >> >> >> >> _______________________________________________ >> This List is provided by the C&C Photo Album >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go bottom of >> page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >> > > _______________________________________________ > This List is provided by the C&C Photo Album > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go bottom of > page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
