Did you strip right down to bare wood? If so what method did you use for
stripping? Chemical, sanding, scraper?
The video on Jamestown distributor says he scrapes and believes that keeping
the scraper sharp, maybe 4 passes before resharpening, is the best and cleanest
method. Very little dust, very little wood removed.
From my Android phone
-------- Original message --------
From: "wwadjo...@aol.com via CnC-List" <cnc-list@cnc-list.com>
Date: 10/23/2014 4:02 PM (GMT-05:00)
To: Edd Schillay via CnC-List <cnc-list@cnc-list.com>
Subject: Re: Stus-List Interior Floor Varnish
Did new floor boards for my 36 last winter. West epoxy then 8 coats minwax
helmsman. I have used many, and this is as good as any. I used gloss, not
slippery if you are wearing shoes.
Bill Walke
Sent from my HTC
----- Reply message -----
From: "Edd Schillay via CnC-List" <cnc-list@cnc-list.com>
To: <cnc-list@cnc-list.com>
Subject: Stus-List Interior Floor Varnish
Date: Thu, Oct 23, 2014 11:00 AM
Listers,
Seeking recommendations for a varnish to use on the interior
floorboards on the Enterprise.
Of course, I want something that is easy to apply, takes a coat or two
to have a award-winning appearance, is durable and something that will last for
a decade or more. And since that produce doesn’t exist, I’d like to know what
would be the best compromise.
The boat's up for the winter, so I’d like to get brushing over the next
few weekends.
All the best,
Edd
Edd M. Schillay
Starship Enterprise
C&C 37+ | Sail No: NCC-1701-B
City Island, NY
Starship Enterprise's Captain's Log <http://enterpriseb.blogspot.com/>
_______________________________________________
This List is provided by the C&C Photo Album
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
