Yes I did take pictures of all rigging , i see what you are saying . Thank you for your help. I will look at the pictures from a week ago .
On Wednesday, February 4, 2015, Marek Dziedzic via CnC-List < cnc-list@cnc-list.com> wrote: > One of the big improvements was the change from the main sheeting to the > cabin top (without the traveller) to a traveller in the cockpit. That > change improved dramatically trimming of the main, even if some complained > that the traveller was getting in the way of getting into the companion way. > > > > There was a good picture on the boat for sail in BC (?) just a week or so > ago. > > > > Marek > > (ex. C&C 24 Fennel) > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com > <javascript:_e(%7B%7D,'cvml','cnc-list-boun...@cnc-list.com');>] *On > Behalf Of *Hoyt, Mike via CnC-List > *Sent:* February-04-15 14:28 > *To:* chris hulett; cnc-list@cnc-list.com > <javascript:_e(%7B%7D,'cvml','cnc-list@cnc-list.com');> > *Subject:* Re: Stus-List C&C24 > > > > Did you take pictures prior to stripping off the hardware? Some of the > added hardware may be a big improvement on the original as many of the > older C&Cs came with hayards led to mast base, no boom vang, no backstay > adjuster, no genoa tracks etc and many boats have been upgraded to run > lines to cockpit and added very necessary sail and rig trim adjustments > > > > Mike > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com > <javascript:_e(%7B%7D,'cvml','cnc-list-boun...@cnc-list.com');>] *On > Behalf Of *chris hulett via CnC-List > *Sent:* Wednesday, February 04, 2015 3:20 PM > *To:* cnc-list@cnc-list.com > <javascript:_e(%7B%7D,'cvml','cnc-list@cnc-list.com');> > *Subject:* Stus-List C&C24 > > > > I have a C&C24 that I recently purchased and it needs a lot of work.I have > striped everything off of the deck and in the process of fixing all the > fiberglass , when I've finished I will start installing all the deck > hardware and lines, it looks like over the years the boat owners have added > extra hardware . I'm wanting to get this boat back to original hardwsre and > lines , so if anyone has pictures of how a C&C 24 should rig I wold live to > see them. >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
