No screws. Just some black and somewhat flexible adhesive. The rain channel? Yeah, impressive attention to detail. That guy Wes is awesome and he charges a small fraction of what I've heard most yards charge.. Gotta love those Georgia boys :-)

I'll take some pictures this weekend / contact him

-Francois

Sent from IBM Notes Traveler


Chuck S --- Re: Stus-List Window Installation - 1985 41 ---

From:"Chuck S" <cscheaf...@comcast.net>
To:"Jean-Francois J Rivard" <jfriv...@us.ibm.com>, "CNC boat owners, cnc-list" <cnc-list@cnc-list.com>
Date:Thu, Feb 12, 2015 11:40 PM
Subject:Re: Stus-List Window Installation - 1985 41


Hi Francois,
Please get that information?  The rain gutter sounds interesting.  did he use screws?


Chuck
Resolute
1990 C&C 34R
Broad Creek, Magothy River, Md


From: "Jean-Francois J Rivard via CnC-List" <cnc-list@cnc-list.com>
To: cnc-list@cnc-list.com, "cenelson" <cenel...@aol.com>
Sent: Thursday, February 12, 2015 4:15:48 PM
Subject: Stus-List  Window Installation - 1985 41

Hi Charlie,

My 34+  were replaced a few years back (Same design as yours) and they were glued in place.  It was done by the "Guru" on the lake and they are tight / waterproof after about 5 years..

I was told that it was a very difficult thing to do as there is a curve on the portlights.  I was also told that he did it by using adhesive and using weights to hold it in place while the adhesive was curing.  He did a really nice job and even made a "Rain gutter" indentation in the top bead for the water to be channelled down..  

I can contact him to get the type of adhesive and more details on the process if you want

Good Luck,

Best regards,

-Francois Rivard
1990 34+ "Take Five"
Lake Lanier, GA
_______________________________________________

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com


_______________________________________________

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Reply via email to