Thanks for the info John and Maryann. I was looking for an electric one. I found it on a couple of sites ranging from $177-$239. I'm thinking of some way to use the foot pump as a back-up however.
Thanks again. Brian > On Mar 14, 2015, at 8:07 AM, John and Maryann Read <johnpr...@comcast.net> > wrote: > > Hi Brian > > Replaced ours 9 years ago. Exact replacement. No problems so far > > TMC International Industries > http://tmcin.com > > Diaphragm foot pump model TMC-70701 > > John and Maryann > Legacy III > 1982 C&C 34 > Noank, CT > > -----Original Message----- > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Brian > Morrison via CnC-List > Sent: Saturday, March 14, 2015 2:44 AM > To: cnc-list@cnc-list.com > Subject: Stus-List Original Bilge Pump C&C34 > > The bilge pump on my 1979 C&C34 has died. I would like to replace it with > the same type. It is the original which is mounted on the wall in the > lazaret. It pulls water from a hose in the bilge and pumps it overboard > through a hose connected on the opposite side of the pump. Does anyone know > where I can find a replacement? > > Brian > > "He gonna gimme my ham, my ham, my ham! He gonna gimme my ham!" August > Wilson's Hambone. > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > --- > This email has been checked for viruses by Avast antivirus software. > http://www.avast.com > _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
