I should know this stuff....the videos are where?
Ron C. _____ From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Chuck S via CnC-List Sent: Thursday, March 26, 2015 10:49 PM To: Aronson, Joel; CNC boat owners, cnc-list Subject: Re: Stus-List Rigging set-up Like your videos. Always meant to do that for my boat and crew. Chuck Resolute 1990 C&C 34R Broad Creek, Magothy River, Md _____ From: "Joel Aronson via CnC-List" <cnc-list@cnc-list.com> To: cnc-list@cnc-list.com Sent: Wednesday, March 25, 2015 1:02:54 PM Subject: Stus-List Rigging set-up All, In order to help my race crew adjust to my boat, I made 2 short videos showing the running rigging and electronics that are on YouTube under C&C 35 Rigging. If you are bored, take a look. What I've done may not be right for anyone else, but it might give you ideas of what to do or not do, and if you have a 35/3, you can see how different our boats are. I know some have a different mast, some have hydraulic vangs, some lack a second jib track and reaching strut, etc. Joel 35/3 Annapolis _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
