Micron 66 needs salt to work. My water is about 1200ppm halfway up the Chesapeake Bay. If you are saltier than me then you might try 66...otherwise steer clear. It can flake off in hand sized flakes.
Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Mar 30, 2015 9:32 AM, "Rick Brass via CnC-List" <cnc-list@cnc-list.com> wrote: > At the risk of starting a firestorm of comment about everyone's favorite > bottom paint, I need to ask a question. I actually hate to ask, since I > should recall the answer from the discussion a couple of weeks ago, but, > HEY, I'm getting old(er). > > > > In a couple of weeks I will be helping a friend paint the bottom on her > new-to-her 29-2. My suggestion, based on my experience in our area, is to > use Petit Ultima SR 60. But it seems that Micron might be significantly > less expensive. And it might be more compatible over the Fiberglass > Bottomkote that seems to be on the boat now. > > > > I recall a comment or two in the recent discussion that indicated that the > two versions of Micron had different effectiveness in brackish water vs > salt water. One worked better in salt water, the other was more effective > in brackish/freshish water. The boat is going to be stored, and mostly > sailed, in brackish to fresh water in the river that runs through town. > > > > So which version of Micron will work better here? > > > > Rick Brass > > *Imzadi *C&C 38 mk 2 > > *la Belle Aurore *C&C 25 mk1 > > Washington, NC > > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
