Does anybody have a photo of the back side of the insturment panel on a Yanmar 2GM20F? If I lift the test switch on the front panle the buzzer will sound, However when I turn the key on to start the engine the oil pressure buzzer is not sounding? What is suspose happen when I stick the key in and turn it to the on position it should Buzz untill I push the start button, the engine starts and builds oil pressure there by turning the switch off? right? then I pulled the wire off the top of the buzzer and tuched it to grounded iron in the etempt to make the buzzer sound no luck. Same thing with the temp with same results? I think when I installed this engine I wired it incorrectly? I'm at a loss and need help. I may have to hire someone to fix it? So a photo would be great or a dirogram
thanks -- *Best regards,* *Curtis McDaniel, * *C&C 30-MK1 East Coast Lady* Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover. -Mark Twain http://eastcostlady.blogspot.com/ *cpt.b...@gmail.com <bobhick...@rogers.com>* *~~~~ __/) ~~~~* .
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
